- can be placed unobtrusively
- preferred uses: on speaker tables, altars, in a grand piano or as a room microphone
- only 80 mm in diameter
- No. 131501
The BLM 03 C is connected through its fixed cable to a Colette CMC microphone amplifier, thus resulting in a complete microphone. All known properties of the BLM 03 C are identical to those of the BLM 3.
It is recommended to use the BLM 03 C when the BLM 3 is too large (for example when recording for TV or film) or too heavy (for example when gluing to the roof inside a vehicle or under the lid of a grand piano).
The active low-cut filter CUT 60 (or predecessor CUT 1/2) can be used.
The small dimensions of the BLM 03 C in combination with the matte gray Nextel surface enable a particularly discreet placement. Even completely invisible placement is possible if the microphone is hidden under a tablecloth made of lightweight fabric.
Due to its small size, however, it should be noted that the BLM 03 C should definitely rest on a sufficiently large, sound-reflecting surface. When recording a panel discussion, a table may be sufficient. For most music recordings a larger area is recommended.
The BLM 03 C can also be mounted in a grand piano with the lid open or closed.
|Pickup pattern|| |
|Frequency range|| |
20 Hz - 26 kHz with CMC 6 / CMR,
20 Hz - 43 kHz with CMC 6xt
-36 dB (V/Pa), 16 mV/Pa with CMC 6
|Equivalent noise level (A-weighted)|| |
12 dB with CMC 6
|Equivalent noise level (CCIR)|| |
23 dB with CMC 6
|Signal-to-noise ratio (A-weighted)|| |
82 dB with CMC 6
|Maximum sound pressure level (THD < 0.5 %)|| |
130 dB-SPL with CMC 6
|Surface finish|| |