RAD-1 suspension, CCM/CMC Edition No. RAD-01060
The RAD-1 suspension is designed for use with microphones of the CCM and Colette series. It offers exceptional damping of boom motion and solid-borne sound.
Compatibility:
- CCM series, CMC 1 U, CMC 1 L
- Also recommended for CMC 6, CMC 6/CUT 60, CMD 42 or MiniCMIT with standard foam windscreen (when heavier windscreens are used, the RAD-2 is recommended).
Items included:
- rotatable XLR holder
- two dark gray, rubber-coated microphone clips
- additional 8-mm microphone clip for Lemo plugs (CCM series or CMC 1 L)
- one pair of stiffer (black) and more compliant (dark gray) isolators
RAD-2 suspension No. RAD-00285
The RAD-2 suspension is designed for use with longer and/or heavier microphone/windscreen combinations, especially with windscreens such as the Radius Nimbus, Rycote Softie or CINELA LEO.It offers exceptional damping of boom motion and solid-borne sound.
The RAD-2's isolators are somewhat thicker than those of the RAD-1, with 3 mm of additional, strong bracing on top in order to carry the extra weight of front-heavy microphones.
Compatibility:
- CMC 6, CMC 6/CUT 60, CMD 42, MiniCMIT, CMIT 5, SuperCMIT
- designed especially for use with foam or other lightweight, removable windscreens (for larger, heavier windscreens the RAD-2 is recommended)
Items included:
- rotatable XLR holder
- three pairs of interchangeable isolators: standard stiffness (black), soft (dark gray) and extra stiff (dark blue)
The holder has soft-coated universal microphone clamps that are suitable for any microphone with a diameter of 19-25 mm. Each bracket contains one pair of standard isolators (black), one pair of softer isolators (dark gray) and one pair of extra-firm isolators (dark blue). The RAD-2 hoops are slightly thicker than the RAD-1 isolators, with an additional 3 mm thick brace on top to support the extra weight of front-heavy microphones. All components are precision injection molded from virtually indestructible thermoplastic elastomers in an ISO-9000 certified factory, not 3-D printed.
RAD XLR cable No. RAD-00612
This short 3-pin XLR cable is suitable for all RAD suspensions. The cable is 275 mm long and has a 90-degree XLR-3F socket connector and a straight XLR-3M plug connector. The cable length and width are designed to fit into the strain relief, with additional clearance for repositioning of microphones.
K 0,3 LU: Lemo/XLR cable No. 302138
This short 3-pin cable is designed for the RAD-1 CCM/CMC Edition. The cable is 275 mm long and has a Lemo plug for the CCM / CMC 1 L and a straight Neutrik XLR(EMC) plug connector. The cable length and width are designed to fit into the strain relief and provide additional clearance for repositioning of the microphone.
