TM S

Gooseneck table stands

TM S 250 LU with CCM 4 microphone

TM S 250 LU

XLR plug in the foot of the _U version

Lemo plug at the input of the L version

TM S 250 C with MK capsule and amplifier CMC 6

TM S 250 C

TM S 250 L38 with CCM -L microphone (cable not shown)

TM S 250 L38

TM S 250 L38

TM S 250 C with MK capsule

Features

  • gooseneck table stand
  • length 250 mm
  • versions with XLR-3M output at the lower end or with 3/8" socket, or for Colette amplifiers
  • for CCM -L or CMC 1 L (plus capsule), or for a Colette amplifier on one side and a capsule on the other

Order number

  • No. 123506 TM S 250 LU: Gooseneck for CCM/CMC 1 L with direct XLR-3M plug at the lower end
  • No. 123505 TM S 250 L38: Gooseneck for CCM/CMC 1 L with 3/8" socket at the output and 5-meter cable
  • No. 133509 TM S 250 C: gooseneck for CMC amplifier + MK capsule
Find dealer

Description

The difference between _U und _38:

  • The __38 version, with its 3/8" socket, can be directly mounted onto a 3/8" tap, such as that of the ST 20-3/8 adapter, the T 5 table base, or any STR vertical support rod.
  • The __U version has an XLR-3M plug directly at its lower end rather than a cable.

The difference between L_ and C:

  • The L38 and LU versions are for the CCM -L or CMC 1 L plus capsule.
  • The C version is for a Colette capsule on the top and a CMC amplifier below.

In-table mounting:

  • Stands that are mounted in-table normally use a TEF table...

The difference between _U und _38:

  • The __38 version, with its 3/8" socket, can be directly mounted onto a 3/8" tap, such as that of the ST 20-3/8 adapter, the T 5 table base, or any STR vertical support rod.
  • The __U version has an XLR-3M plug directly at its lower end rather than a cable.

The difference between L_ and C:

  • The L38 and LU versions are for the CCM -L or CMC 1 L plus capsule.
  • The C version is for a Colette capsule on the top and a CMC amplifier below.

In-table mounting:

  • Stands that are mounted in-table normally use a TEF table flange. For a 250 mm long in-table stand, the lightweight version TEF-S should be used, or for use with a popscreen, the medium-hard variant TEF-M.
  • A complete table microphone set could be made up of these items, for example:
    • B 1 D popscreen
    • CCM 4-L microphone
    • TM S 250 L38 gooseneck table stand
    • ST 20-3/8 thread adapter
    • TEF-M table flange

moreless

Practice

  • _U version: This gooseneck is used at an ordinary speaking position, or, together with the socket end of an XLR cable, anchored in a TEF table flange.
  • _38 version: This gooseneck is for mounting on a 3/8" tap. It is used at an ordinary speaking position, or - together with the socket end of an XLR cable, anchored in a TEF table flange.
  • _C version: An MK microphone capsule is screwed onto one end and a CMC microphone amplifier on the other. The CMC amplifier is then mounted in a TEF table flange.

Technical Specifications

Length

250 mm

Diameter

6,4 mm

Variants & Options

  • any combinations are possible in the TM family of table stands: IN-TABLE MOUNTING
    • for MK  (Colette) capsules or CCM-L microphones
    • any desired combinations of swivel joints, goosenecks and extension tubes
    • LED indicator
    • at the lower end, an 3/8" thread and a cable or an XLR plug
    • a variety of lengths

Similar products

TM GRG, TM RG

Table-mounted tube with swivel(s)

TM RS, TM SRS

Table stand with gooseneck and tube

TR

TABLE STANDS

TSR

TABLE STANDS

TC, TC 2, T 20

Miniature Table Stand

T 5

Heavy Table Stand

S 170 L

Short gooseneck

Recommended accessories

TEF

Tabletop mounting adapter

LED Option

for TM table stands and tubes

B 1 D

Hollow foam Popscreen for 20 mm

B 5 D

Hollow Foam Popscreen for 20 mm

MK 4

Cardioid Microphone capsule

CCM 4

Compact Microphone

CMC 1 L

Microphone Amplifier

ST 20-3/8

Cylinder for table mounting

T 5

Heavy Table Stand