MSTC 64 U

ORTF Stereo Microphone

Properties

  • Stereo microphone for recording using the ORTF technique
  • excellent stereophonic characteristics: very good localization, very good spatial quality
  • preferred use as a main microphone for recording ensembles and choirs or as a stereophonic spot microphone

The MSTC 64 is one of SCHOEPS' bestsellers. Its compact elegance and excellent spatial quality make it a classic in the sound engineer’s standard portfolio.

This microphone consists of a T-shaped two-channel microphone amplifier, which two paired MK 4 cardioid capsules are screwed onto. They are arranged at a distance of 170 mm at an angle of 110° to each other, as required for the ORTF method.


Order number

  • No. 148003

Description

The MSTC 64 is particularly impressive in that it usually also gives very good results without spot microphones. In addition, its placement is relatively unimportant, making it suitable for the rather inexperienced or hasty user. Set-up is quick and easy, because only a single stand and cable are required and the capsule distance and the offset angle of the capsules to each other don’t need be adjusted.

At the output of the MSTC 64 is an XLR-5M plug to which e.g. the stereophonic cable KS 5 U, or the breakout AK SU/2U is connected.

Videos

The Wikisinger, recorded with the MSTC 64 U

Special thanks to Vincent Rouffiac, Touché Videoproduktion
Also have a look at the Making of and the Wikidrummer.

Practice

For outdoor use, a wind basket, e.g. the CINELA Albert or a CINELA OSIX with a single windshield is recommended.

Alternatively, the ORTF Outdoor Set can be used which employs single CCM microphones in an ORTF arrangement.

Technical Specifications

Pickup pattern

Cardioid (2× MK 4)

Frequency range

40 Hz - 26 kHz

Sensitivity

-36,5 dB (V/Pa), 15 mV/Pa

Equivalent noise level (A-weighted)

14 dB

Equivalent noise level (CCIR)

24 dB

Signal-to-noise ratio (A-weighted)

80 dB

Maximum sound pressure level (THD < 0.5 %)

131 dB-SPL

Maximum output voltage

1 V (0 dBV) with 1 kΩ load

Low cut filter

30 Hz, 6 dB/oct.

Minimum recommended load impedance

1 kΩ

Output impedance

35 Ω

Maximum cable length

> 300 m

SCHOEPS RFI Shield

-

Powering standard / Valid range

P48 / >24 V

P12 / >11 V

Current consumption

4 mA per channel

Common mode rejection ratio (at 1 kHz)

> 60 dB

Output

XLR-5M, analog, 2 channels

Distance between the microphones

17 cm

Recording angle

95°

Weight

232 g (with capsules)

Surface finish

matte gray (g) or custom color

Downloads

MSTC 64 Ug

ORTF-stereo microphone

User guides, manuals

de | en
Stereo and Surround recording principles

by Helmut Wittek, 2012.

Lectures

en