Double M/S

Colette

CCM

CMIT 5 U

Special Microphones

Stereo

Surround

Surround Setups Double M/S IRT Cross KFM Surround OCT Surround ORTF Surround

Accessories Preamplifiers

”Double M/S” is an improved version of the well-known M/S stereo recording technique. In addition to a frontfacing cardioid or supercardioid ”mid” microphone and a figure-8 ”side” microphone, a rear-facing directional microphone is set up. The front- and rear-facing microphones share the signal of the figure-8 microphone so as to form two complete, back-to-back M/S systems. One M/S system then provides the three front channels (the center channel signal being provided directly by the mid microphone of the front system), while the other system provides the two surround channels. An arrangement of this kind allows flexible processing of the stereo surround image width and post-production adjustment for both of the M/S pairs.

	Adapter Cable AK DMS 3U XLR-7F jack to 3 × XLR-3M plugs
show

	Elastic suspension for Double M/S A DMS LU corresponds to the WSR DMS LU without windscreen
show

	Double M/S Set CMIT Double M/S Set requires only three microphones and channels for 5.0 surround very small, lightweight array easily protectable against wind influences dematrixing can be performed during or after recording
show

	Splitterbox for Double-MS DMS-Splitter adaptiert das XLR-7 Kabel für 2 MS-Matrizen und den Center-Kanal
show

	Set for Three-Channel M/S Recordings Double M/S Set for plug-in very small, lightweight array requires only three microphones and recording channels for 5.0 surround
show

	Double M/S Set Double MS Set 'MDMS' requires only three microphones and channels for 5.0 surround very small, lightweight array can be well protected against wind (with “fur” Windjammer) matrixing can be performed during or after recording
show

	Double M/S Set Double MS Set 'Splitter' requires only three microphones and channels for 5.0 surround very small, lightweight array can be well protected against wind (with “fur” Windjammer) matrixing can be performed during or after recording
show

	Surround Plug-in for RTAS Mac, VST Windows/Mac Double MS Tool decodes the three Double M/S signals to a 5.0 mix available for free requires a multi-channel software host
show

	XLR-7 Multicore Cable K DMS 5 U XLR-7 multicore cable for three balanced signals
show

	Passive matrix for Double M/S MDMS U the simplest way to decode five channels from three microphone signals powers the three microphones correctly when connected to five microphone inputs
show

	Windjammer WJ DMS CMIT for WSR DMS CMIT LU (double M/S with the CMIT 5 U)
show

	Basket-Type Windscreen WSR DMS CMIT LU for double M/S with the CMIT 5 U requires only three microphones and channels for 5.0 surround
show

	Basket windscreen for Double M/S WSR DMS LU basket-type windscreen with elastic suspension for double M/S
show

Find out more about surround recording in our surround brochure, which you can download here:
Schoeps Surround Brochure